Indicator Status Meaning Diagnosis
Procedure
O The port is not
connected
properly.
1. Connect the
port to another
switch, optical
ber, and
optical module
to check
whether the
original switch
and optical
ber are
normal and
whether the
type and speed
of the original
optical module
are correct.
2. Check the NIC
status in the
OS.
3. Check whether
the ports on
the switch and
NIC are up.
● Data
transmission
status indicator
of a 10GE
optical port
● Data
transmission
status indicator
of a 25GE
optical port
Blinking orange Data is being
transmitted or
received over the
port.
N/A
O No data is being
transmitted over
the port.
40GE optical port
indicator
Steady green The network is
connected
properly.
N/A
Blinking green Data is being
transmitted.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 71
To Next Page
Loading...
