Huawei E9000 - Page 81

Indicator Status Meaning Diagnosis
Procedure
O No data is being
transmitted or the
network is
disconnected.
1. Connect the
port to another
switch, optical
ber, and
optical module
to check
whether the
original switch
and optical
ber are
normal and
whether the
type and speed
of the original
optical module
are correct.
2. Check the NIC
status in the
OS.
3. Check whether
the ports on
the switch and
NIC are up.
● Connection
status indicator
of the 8G FC
optical port
● Data
transmission
status indicator
for the 16G FC
optical port
Steady orange Signals are not
synchronized
between the port
on the switch
module and the
port on the peer
device.
Check whether
the network cable
is connected
properly and
whether the
optical module
and NIC are
normal.
Blinking orange
(once every 2
seconds)
The port is
disabled.
Blinking orange
(twice every
second)
The port is not
functioning
correctly.
O If the connection
status indicator is
o, no optical
module is
installed or the
optical module is
not receiving
optical signals
properly.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 72