Huawei E9000 - Page 82

Indicator Status Meaning Diagnosis
Procedure
● Connection
status indicator
of an 8G FC
optical port
● Connection
status indicator
for the 16G FC
optical port
Steady green The port is
functioning
correctly and its
link is connected.
N/A
Blinking green
(once every 2
seconds)
The port is
functioning
correctly but
isolated. No link is
set up.
If the peer device
is a switch, check
whether the
working modes of
the switches
match. For details,
see the
FusionServer Pro
E9000 Server
V100R001 Site
Deployment
Guide
. If the peer
device is a storage
device, check the
port.
Blinking green
(twice every
second)
A port inloop
(diagnosis mode)
occurs.
N/A
Blinking green
(four times every
second)
The link is
connected and
data is being
transmitted.
O If the diagnosis
status indicator is
o, no optical
module is
installed or the
optical module is
not receiving
optical signals
properly.
Check whether
the optical
module is
installed and
operating properly
and whether the
optical cable is
faulty.
Data transmission
status indicator of
an 8G FC optical
port on the CX911
Blinking orange
(twice every
second)
An
overtemperature
alarm is
generated if the
connection status
indicator is
blinking green.
View the iMana
200 or iBMC
event alarm logs
to check whether
an
overtemperature
alarm is
generated.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 73