eA380 Series LTE CPE
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 3 Connect the PoE adapter.
Connect the splitter with the adapter, as shown in Figure 3-16.
Figure 3-16 Connecting the PoE adapter
1. DATA port: connects to the computer
network cable.
2. PoE port: connects to the PoE network
cable.
----End
3.4 Installation Check
After you install the eA380, perform a hardware installation check and a power-on check.
Prerequisites
The eA380 hardware has been installed.
Procedure
Step 1 Check whether the eA380 hardware is correctly installed.
When performing the hardware check for the eA380, check the items listed in Table 3-2 in
order.
To Next Page
Loading...
