Huawei eA380-123 - Configuration Introduction; 4.1 Log in to the WebUI

eA380 Series LTE CPE
User Guide
4 Configuration Introduction
Issue 01 (2017-08-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
39
4 Configuration Introduction
About This Chapter
This chapter describes the configuration Introduction of the eA380s.
4.1 Log in to the WebUI
Prerequisites

The deployment on the network side is complete.

The computer has been connected to the eA380.

The installation of the eA380 is complete.

The eA380 starts correctly based on default parameters during power-on.
Procedure
Step 1 Start the IE browser, enter https://192.168.1.1 in the address bar, and press Enter. Connect
the eA380 from the near end using the Web management page.
Use Internet Explorer 9.0 or a later version.
Step 2 Log in to the web management page with User name set to default value admin and
Password set to default value admin.
Step 3 Access Password Modification and modify New Password.
Use the default values of other parameters. To change the default settings, please refer to the LTE CPE
Online help.
----End