Huawei EchoLife EG8245H5

To Next Page

To Previous Page

NO TE

● The ber connector connected to the optical port on the wall varies depending on

actual conditions.

● To ensure normal use of bers, make sure that the ber bending radius is larger than 30

mm.

No. Item Description

1 On/O Powers the ONT on or o.

2 Power Connects to a power adapter.

3 TEL1-

TEL2

Connects to the ports on a telephone or fax machine.

4 LAN1-

LAN4

Connects to PCs or IP set-top boxes (STBs).

5 Optical

port

The optical port is equipped with a rubber plug and

connected to a ber for upstream transmission.

The type of the optical connector connected to the optical

port can be SC/APC.

6 Reset Press the button for a short time to reset the device; or press

the button for a long time (longer than 10s) to restore the

device to the default settings and reset the device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to

access the Internet. If an ONT cannot access the Internet after a

reset, contact your Internet service provider.

7 USB Connects to USB storage devices.

8 WPS When the WLAN is on, press the WPS button (> 3s) and

release the button to start Wi-Fi protected setup (WPS)

negotiation.

9 WLAN Used to enable or disable the WLAN function

- When the WLAN is disabled, press the WLAN button (> 3s)

and release the button to enable the WLAN.

- When the WLAN is enabled, press the WLAN button (> 3s)

and release the button to disable the WLAN.

EchoLife EG8245H5

Quick Start for QR code 2 Connecting Cables

Huawei EchoLife EG8245H5 - Page 7