EasyManua.ls Logo

Huawei ePico3801 - Modifying the VLAN Attributes

Huawei ePico3801
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Choose DNSSERVER to set the IP address of the DNS server.
2. Choose DSCPMAP to set the priority of the service packet.
3. Choose ETHPORT to set the FE port parameters.
4. Choose IPRT to set the IP route.
5. Choose IPSECALGORITHM to set the IPSEC algorithm.
6. Choose LIMITRATE to set the limit rate for port transmission.
7. Choose MULPARA to set the transmission bandwidth multiplexing function.
8. Choose PPPOEATTR to set the attributes of the PPPoE link.
9. Choose SALIFETIME to set the life cycle of the SA.
10. Choose SCTPPARA to set the SCTP parameters.
11. Choose URL to set the domain name or IP address of the preset SGW.
NOTE
For details about how to set the parameters, see Help in the corresponding command window.
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End
5.5.3 Modifying the VLAN Attributes
This chapter describes how to configure the VLAN attributes according to the service type.
Prerequisite
l The parameters of the ePico zone have been set successfully.
l You have logged in to the AP Manager (APM). The login account belongs to the
Administrator or Operators group.
l The VLANs have been correctly configured for the LAN switch and the ePico3801 has
been connected to the corresponding VLAN interface.
Procedure
Step 1 Log in to the APM. Choose Configuration > Single Configuration and select an ePico3801 to
be maintained. Then, click Configure to enter the configuration window.
Step 2 Choose Terminal Parameter > TRANSFER > Configuration > VLAN in the navigation tree
to configure the VLAN attributes.
NOTE
For details about how to set the parameters, see Help in the corresponding configuration window.
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End
5 Reconfiguring the ePico3801
ePico3801
User Guide
5-12 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009–09–23)

Table of Contents

Related product manuals