Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
After the protocol is changed, the IAD will automatically
restart. The data, if not saved, will be lost after the IAD restart.
Therefore, you must save the settings before changing the
protocol.
4. Choose Advanced Configuration > Protocol Mode.
The Protocol Mode page is displayed.
2. Select SIP and click OK.
Step 2 Log in to the web management system and click
.
Step 3 Configure network parameters for the IAD104H.
1. Click Start.
The Basic Configuration > Network Parameter page is
displayed.
5. Set WAN parameters as planned.
To Next Page
Loading...
