Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A digitmap indicates a dialing rule, which is used to determine
whether the range and length of the dialed number comply
with the dialing rule. The SIP digitmap commonly used by the
IAD is [XABCD*#].T, which is the default value. For details
about the digitmap and configuration procedure, see
Configuration > Manual Configuration (Web) > SIP
Service Configuration > Configuring a SIP Digitmap in the
eSpace IAD104H Product Documentation.
Step 8 Save the settings.
1. Click Next.
The Maintenance > Save Data page is displayed.
2. Click OK.
3. Click Finish.
If you want to configure other data, see the eSpace IAD104H
Product Documentation.
---- End
Verification
After the preceding configuration is complete, the IAD is
running properly. You can use the following method to verify
the configuration:
Choose SIP Service Configuration > FXS User. The
FXS configuration page is displayed. View the user
registration status. If the state is Registered, it indicates
that the user is registered successfully.
To Next Page
Loading...
