Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 2 Log in to the web management system and click
.
Step 3 Configure network parameters for the IAD104H。
1. Click Start.
The Basic Configuration > Network Parameter page is
displayed.
2. Set WAN parameters as planned.
There are three methods of obtaining the IP address. Select a method
based on the actual networking scheme. For details, see the help
information.
3. Click Save.
The confirmation dialog box is displayed.
4. Click OK.
The web management system automatically restarts.
To Next Page
Loading...
