Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
About This Chapter
You can use the CLI to configure all eSpace Integrated Access
Device 104H (IAD104H) functions. The chapter describes how
to configure about typical scenes and advanced parameters by
using the command line (CLI).In addition, some titles are
marked with (SIP) or (MGCP) to indicate that these service
configurations can be implemented over SIP or MGCP.
4.1 Logging In Through Telnet
The IAD104H supports data configuration and maintenance
management in Web mode.
Context
You can log in to the web management system of the
IAD104H in either of the following modes:
HTTPS
The web browser interacts with IAD104H through
HTTPS, which ensures user information security.
To Next Page
Loading...
