Huawei FusionDC1000A - Sliding Cabinets

Figure 3-6 Repainting using a painting gun
----End
Follow-up Procedure
Check whether the surface meets the requirement after repainting.
3.2 Sliding Cabinets
Context
● If the maintenance space on the rear door of the integrated UPS in the N+X
scenario is
insucient, slide the cabinet to expand the maintenance space.
● If the maintenance space on the rear door of an IT cabinet is
insucient in
the N+X or 2N scenario, slide the cabinet to expand the maintenance space.
Figure 3-7 Sliding direction and distance
(1) IT cabinet
(2) UPS cabinet
Procedure
Step 1 Remove the bolts securing the cabinet sliding base fasteners using an adjustable
wrench, and remove the fasteners.
FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario) 3 Routine Maintenance
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 24