protection regulations and wear ESD clothing and ESD gloves or a well-
grounded ESD wrist strap.
Figure 1-2 Wearing an ESD wrist strap
● When holding a board or a module with exposed circuit boards, hold its edge
without touching any components. Do not touch the components with bare
hands.
● Package boards or modules with ESD packaging materials before storing or
transporting them.
1.3 Environmental Requirements
Do not expose the equipment to ammable or explosive gas or smoke. Do not
perform any operation on the equipment in such environments.
Do not store any ammable or explosive materials in the equipment area.
Do not place the equipment near heat sources or re sources, such as smoke,
candles, heaters, or other heating devices. Overheat may damage the equipment
or cause a
re.
FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario) 1 Safety Information
Issue 02 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 8
To Next Page
Loading...
