4.7.2.1 IP Address Preinstallation Planning
The IP address must be in compliance with the following requirements:
● The static IP address must be used.
● The IP address must be unique on the live network.
● You can plan only one IP address for one network interface. It is not allowed
to plan or set multiple IP addresses for the same network interface.
● The NetEco server can communicate with managed devices.
● The NetEco server can communicate with Web clients.
The subnet mask of all IP addresses is 255.255.255.0.
Table 4-8 IP address list
Item Preinstallation Setting Description
Server IP
address
192.168.8.11 Used for logging in to the NetEco and
PowerEcho.
4.7.2.2 Obtaining the NetEco Software License
The NetEco software license is not provided together with software to the
customer. Therefore, obtain the NetEco software license in advance.
Obtain the license from the Huawei's enterprise support website.
● For enterprise users:
a. Log in to Huawei's enterprise support website https://
support.huawei.com/enterprise.
b. Browse or search for iManager NetEco 6000 License Application Guide,
and apply for the license of the NetEco software by referring to the guide.
● For carriers:
a. Log in to Huawei's carrier support website https://support.huawei.com.
b. Browse or search for iManager NetEco 6000 License Application Guide,
and apply for the license of the NetEco software by referring to the guide.
4.7.2.3 Logging In to the NetEco Client
This section describes how to log in to the NetEco client using a web browser.
Prerequisites
Valid user name and password are available.
Procedure
Step 1 In the browser address box, enter https://
IP address of the NetEco server
:31943,
and then press Enter.
FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario) 4 Commissioning Core Devices
Issue 02 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 55
To Next Page
Loading...
