Indica
tor
Color Name Status Description
RF_Z Green Communicati
on status
indicator
Steady on No network parameters exist,
or a network is to be created.
Blinking at
long
intervals
A network is set up, and no
node access is allowed (the
indicator blinks at 0.5 Hz, on
for 1s and then o for 1s).
Blinking
intermittentl
y at super
short
intervals
The AC actuator is searching
for a network (the indicator
blinks at super short intervals
for 0.5s and then turns o for
0.5s).
6.6 Access Actuator
The access actuator is the control component for the aisle door in a smart module.
It connects to the ECC800-Pro controller over FE port, wireless networking
(802.15.4). It opens the magnetic lock by detecting the card swiping information
of the card reader, door open button information, and re linkage information. It
has access right management, access event record, and alarm record functions.
Figure 6-12 Access actuator
(1) 48 V power port
(2) PoE port (3) RS485 port COM2
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 6 Management System
Issue 04 (2023-11-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 86
To Next Page
Loading...
