Figure 9-14 PuTTY Configuration
Step 7 Set Close window on exit to Only on clean exit.
Set Saved Sessions and click Save. You can double-click the saved record in Saved Sessions to log in to
the server next time.
Step 8 Click Open.
The PuTTY screen is displayed. Then the message "login as:" is displayed, prompting you to
enter a user name.
l If this is your first login to the server, the PuTTY Security Alert dialog box is displayed. Click Yes
to proceed.
l If an incorrect user name or password is entered, you must set up a new PuTTY session.
Step 9 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the prompt.
----End
FusionServer Pro 2288H V5 Server
User Guide
9 Common Operations
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 132
To Next Page
Loading...
