Huawei FusionServer Pro 2288H V5 - Page 175

Sensor Description Component
DIMMN DIMM status DIMMN
N indicates the DIMM slot
number.
RTC Battery RTC battery status. An
alarm is generated when the
voltage is lower than 1 V.
RTC battery
PCIE Status PCIe status PCIe card
Power Button Power button pressed state Mainboard and power
button
Watchdog2 Watchdog timer Mainboard
Mngmnt Health Management subsystem
health status
Management module
UID Button UID button status Mainboard
PwrOk Sig. Drop Voltage dip status Mainboard
PwrOn TimeOut Power-on timeout Mainboard
PwrCap Status Power capping status Mainboard
HDD Backplane Entity presence Drive backplane
HDD BP Status Drive backplane health
status
Drive backplane
RiserN Card Entity presence Riser card N
N indicates the riser card
slot number. The value
ranges from 1 to 3.
SAS Cable Entity presence SAS cable
FANN R Presence Fan presence Fan module N
N indicates the fan module
number. The value ranges
from 1 to 4.
RAID Presence RAID controller card
presence
RAID controller card
LCD Status LCD health status LCD
LCD Presence LCD presence LCD
PS Redundancy Redundancy failure due to
PSU removal
PSU
NIC# Status NIC fault diagnosis health
status
LOM port
FusionServer Pro 2288H V5 Server
User Guide
A Appendix
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 167