7.2.4.1 Installing L-Shaped Guide Rails
L-shaped guide rails are designed for Huawei cabinets only.
The 2288H V5 servers are stackable onto L-shaped guide rails.
Procedure
Step 1 Install floating nuts.
1. Determine the installation positions of the floating nuts according to the cabinet device
installation plan.
Figure 7-3 Spacing of 1U on a mounting bar of a cabinet
– Floating nuts are used to tighten screws.
– The boundary between Us is used as the reference for calculating device installation space.
2. Fasten the lower end of a floating nut to the target square hole in a mounting bar at the
front of the cabinet.
3. Use a floating nut hook to pull the upper end of the floating nut, and fasten it to the upper
edge of the square hole.
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 77
To Next Page
Loading...
