b. Enter the user name and password.
▪ The system provides a default user in the administrator group. The default
user is Administrator, and the default password is Admin@9000.
▪ When Domain is Local iBMC, the maximum length of the user name is 20
characters.
▪ When Domain is not Local iBMC, the maximum length of the user name is
255 characters.
c. Select This iBMC or Automatic matching from the Domain drop-down
list.
d. Click Log In.
After the login is successful, the Overview page is displayed, showing the
user name in the upper right corner.
▪ The system may display a message indicating incorrect user name or
password when you attempt to log in using Internet Explorer after the system
is upgraded. If this occurs, press Ctrl+Shift+DEL, click Delete to clear the
browser cache, and attempt to log in again.
▪ If the login still fails, choose Tools > Internet Options > Advanced in the
menu bar and click Reset to restore default settings of Internet Explorer. Then
attempt to log in again.
● Log in as an LDAP user.
Before login, ensure that the following settings meet the requirements:
– A domain controller exists on the network, and a user domain and LDAP
users have been created on the domain controller.
For details about how to create a domain controller, a user domain, and
LDAP users, see the documents about the domain controller. The iBMC
provides only the access function for LDAP users.
– On the
Conguration > LDAP page of the iBMC WebUI, the LDAP function
is enabled, and the user domain and the LDAP user who belong to the user
domain are set.
a. Select a language.
b. Enter the LDAP user name and password.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 10 Common Operations
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 108
To Next Page
Loading...
