HUAWEI TECHNOLOGIES CO., LTD.
Page 58
5 Security Setting
5.1 How to set the startup password?
Select Main Menu – Setting –Security Setup – Phone lock.
5.2 What can the user do when the mobile phone prompts to enter a password during the startup?
If the password is forgotten, what can the user do?
There are three passwords, mobile phone code, PIN1 code and PIN2 code.
Mobile phone code: Provided by the mobile phone. The initial value is 1234. It can be changed.
PIN1 code: Provided by the intelligent card. Check the description of the intelligent card or make an
inquiry to the operator.
PIN2 code: Unchain the SIM lock caused by wrong PIN1 code. Check the description of the intelligent
card or make an inquiry to the operator.
When the password is forgotten, contact the relevant equipment provider or operator.
5.3 How to lock and unlock the mobile phone quickly?
In the standby state, press left soft key, then press “*” to lock the keypad. When the keypad is locked,
press the Left soft Key and then press “*” to unlock the keypad.
To Next Page
Loading...
