7
3. Change the default Wi-Fi name, password, and login password as prompted.
After the Wi-Fi name and password are changed, you will need to reconnect the phone or laptop to the CPE's Wi-Fi network
again.
4. Use the new password to log in to the web-based management page.
5. On the home page, click Check location signal.
6. Measure the signal strengths at the recommended installation positions following the page instructions, and find
the location with the optimal signal strength.
The CPE can be installed on a pole or wall, and must be within the 45-degree protection angle of the lightning rod.
http://XXX.XXX.XXX.X/
Disable Mobile Data
Check location signal
http://XXX.XXX.XXX.X/
Current signal quality
Excellent
92
Score
Excellent
Poor
45° 45°
To Next Page
Loading...
