b. Click User 2 > H248 and set TID to A1.
NOTE
The terminal IDs A0 and A1 must be consistent with the corresponding configuration on the
MGC.
(4) Click OK. In the dialog box that is displayed, click OK. After the device
automatically restarts, the configuration takes effect.
----End
Result
Connect two phone sets to two TEL ports of different ONTs, and calls can be made between
two phone sets.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-135
To Next Page
Loading...
