Huawei HG8240 - Page 183

7. Check the ONT connection status.
In the navigation tree, choose Status > WAN Information. In the right pane,
Status is Connected and the obtained IP address is displayed at IP.
8. Check the registration status of the voice user.
In the navigation tree, choose Status > VoIP Information. In the right pane, User
Status is Up.
l Configure the ONT on the U2000.
NOTE
Some voice parameters cannot be configured on the NMS but can be configured by importing an XML
configuration file. For details about how to import an XML configuration file, see 3.6.2 Operation Guide
on the XML Configuration File (on the U2000).
The following uses batch configurations of creating a value-added service profile of the
ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT,
right-click, and choose Configure Value-Added Service from the shortcut menu.
1. Log in to the NMS (iManager U2000 V100R002C01) and start the FTP service.
2. Configure the value-added service profile of the ONT.
(1) From the main menu, choose Configuration > Access Profile Management >
ONT VAS Profile.
(2) On the ONT VAS Profile tab page, right-click, and choose Add from the shortcut
menu.
(3) In the dialog box that is displayed, set relevant parameters.
– Profile Name: ONT-VoIP
– Vendor ID: HWTC(2011)
– Terminal Type: 245
– Version: V1R002C00-V1R002C01
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-145