Huawei HG8240 - Page 220

Configurat
ion Item
Data Item Detailed Data Remarks
Wi-Fi
service
(Layer 3
bridge)
password as the upper-
layer BRAS.
l The HSI service
involves the Layer 2,
Layer 3 bridge and
Layer 3 routing modes.
In the Layer 2 mode, all
configurations are
required only on the
OLT. The application
mode of the Layer 3
bridge mode is similar
to the Layer 2 mode. It
is recommended that
you use the Layer 2
mode.
l The Wi-Fi service does
not support the Layer 2
mode.
l Service type: Internet (not
configurable)
l Connection mode: bridge
l VLAN ID: 40
l 802.1p: 1
l Bound port: SSID1
Wi-Fi
service
(Layer 3
routing)
l Service type: Internet
l Connection mode: routing
l VLAN ID: 40
l IP address Obtainment
mode: PPPoE (user name:
iadtest@pppoe, password:
iadtest)
l 802.1p: 1
l NAT function: enable
l Bound port: SSID1
VoIP service
data
SIP
parameters
l IP address of the primary
server: 200.200.200.200
l Port ID of the primary
server: 5060
l Home domain name:
softx3000.huawei.com
l Digitmap: x.S|x.# (Default)
l User 1:
– Phone number:
88001234
– Authentication user
name:
88001234@softx3000.h
uawei.com
– Password: iadtest1
l User 2:
– Phone number:
88001235
– Authentication user
name:
88001235@softx3000.h
uawei.com
– Password: iadtest2
The software version that
supports SIP is
V100R002C00.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-182 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)