Huawei HG8240 - Page 317

Parameter Description
IP Acquisition Mode Indicates the mode of obtaining an IP
address on the ONT. It can be set to DHCP,
static, or PPPoE.
l In DHCP mode, the IP address is
dynamically obtained.
l In static mode, the IP address is set
statically. You need to enter the IP
address, subnet mask, IP addresses of
the active and standby DNS servers,
and default gateway.
l In PPPoE mode, you need to enter the
user name and password.
NAT Indicates whether to enable the NAT
function.
Vendor ID Set the option 60 field on the DHCP client.
The IP address can be obtained from the
DHCP server only when the option 60 field
is the same as the setting on the upper-layer
DHCP server. When IP Acquisition
Mode is set to DHCP, this parameter is
configurable.
Binding options Used to bind the WAN interface to the
LAN port or to the wireless SSID.
NOTE
Before setting the binding options, set the work
mode of the LAN port or the wireless SSID. The
binding options can be set only after the work
mode or wireless SSID is successfully set. For
details, see 5.3.1 LAN Port Work Mode and
5.4.1 WI-FI Basic Configuration.
l WAN Configuration - bridge
1. In the navigation tree on the left, choose WAN > WAN Configuration. In the pane
on the right, click New. In the dialog box that is displayed, set Mode to Bridge, as
shown in Figure 5-11.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 5 Web Page Reference
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-9