Figure 5-16 Wi-Fi Advanced Configuration
2. Click Apply to apply the configuration.
Table 5-5 describes the advanced Wi-Fi parameters.
Table 5-5 Advanced Wi-Fi parameters
Parameter Description
Transmitting Power Indicates the transmit power of the wireless signals. It can be set
to 25%, 50%, 75%, or 100%. The greater the value is, the better
is the coverage of the wireless signals.
Regulatory Domain Indicates the country code of the wireless network.
Channel Indicates the channel of the wireless network. It varies with
Regulatory Domain.
Channel Width Indicates the wireless channel width. Options are auto 20/40 and
20 MHz.
Mode Indicates the working mode of the Wi-Fi terminal NIC. The NIC
can negotiate among the 802.11b, 802.11g, 802.11n and
802.11b/g modes.
Advanced Configuration Indicates whether to enable the advanced Wi-Fi configuration.
The following parameters can be set only when the advanced
Wi-Fi configuration is enabled.
DTIM Period Indicates the delivery period of the delivery traffic indication
map (DTIM). It ranges from 1 to 125, and the default value is 1.
Beacon Period Indicates the delivery period of the beacon. The beacon is used
to contact other access point devices or network control devices.
It ranges from 20 ms to 1000 ms, and the default value is 100
ms.
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-18 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
To Next Page
Loading...
