Huawei HG8240 - Figure 5-26 USB; Network Applications; Usb

Parameter Description
Trigger Start Port Indicates the destination start port of the port trigger packet.
Trigger End Port Indicates the destination end port of the port trigger packet.
Open Start Port Indicates the destination start port of the open packet.
Open End Port Indicates the destination end port of the open packet.
Enable Indicates whether to enable the port trigger.
5.8 Network Applications
This topic describes how to configure the USB, ALG, UPnP, and ARP through the Web page.
5.8.1 USB
5.8.2 ALG Configuration
5.8.3 UPnP Configuration
5.8.4 ARP Configuration
5.8.1 USB
1. In the navigation tree on the left, choose Network Applications > USB. In the pane on the
right, set the parameters related to FTP downloading to share the FTP file of the ONT, as
shown in Figure 5-26.
Figure 5-26 USB
2. Click Download to download files from the FTP server to the USB storage device.
Table 5-13 describes the parameters related to the USB.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 5 Web Page Reference
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-29