Huawei IPC6131-WD-A - IP Address Filter

Figure 12-3 RTSP Authentication
Step 2 Select the Authentication type basic or disable in the drop-down list to enable or disable the
RTSP authentication.
NOTE
If you disable the RTSP authentication, anyone can access the video stream by the RTSP protocol via the
IP address.
Step 3 Click to save the settings.
----End
12.3 IP Address Filter
This function makes access control possible, by which you can stop or allow the specific IP
accessing the device.
Step 1 Enter the IP Address Filter interface: Configuration> Advanced Configuration> Security >
IP Address Filter.
Figure 12-4 IP Address Filter Interface
Step 2 Check the checkbox of Enable IP Address Filter.
Step 3 Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed are selectable.
Step 4 Set the IP Address Filter list.
----End
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
12 Others
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123