Huawei IPC6131-WD-A - Maintenance; Rebooting the Camera; Restoring Default Settings

In the Device Information interface, you can edit the Device Name.
Other information of the network camera, such as Model, Serial No., Firmware Version,
Encoding Version, Number of Channels, Number of HDDs, Number of Alarm Input and Number
of Alarm Output are displayed. The information cannot be changed in this menu. It is the
reference for maintenance or modification in future.
Figure 12-7 Device Information
12.5 Maintenance
12.5.1 Rebooting the Camera
Step 1 Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance or Configuration > Advanced Configuration> System > Maintenance.
Step 2 Click to reboot the network camera.
Figure 12-8 Reboot the Device
----End
12.5.2 Restoring Default Settings
Step 1 Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance or Configuration > Advanced Configuration> System > Maintenance.
Step 2 Click
or to restore the default settings.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
12 Others
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
125