Figure 12-9 Restore Default Settings
NOTE
Click , the IP address and the user information will not be restored.
----End
12.5.3 Exporting /Importing Configuration File
The configuration file keeps the current device parameters. When batch configuration is
required, you can export the configuration file first, and then import the configuration file to the
batch of devices instead of the manual configuration.
Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance or Configuration > Advanced Configuration> System > Maintenance.
Step 1 Click
and save the configuration file of the current device.
Step 2 Click to find the configuration file and then click to start importing
configuration file.
NOTE
You need to reboot the camera after importing the configuration file.
Figure 12-10 Export/ Import Configuration File
----End
12.5.4 Upgrading the System
Some of the new functions will be developed after one version is released, and you can upgrade
the device to gain the newly-added functions. Please refer to Network Camera Upgrade Quick
Guide for more detailed information.
Step 1 Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance or Configuration > Advanced Configuration> System > Maintenance.
Step 2 Click
to select the local upgrade file and then click to start remote
upgrade.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
12 Others
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
126
To Next Page
Loading...
