No. Description
7 Serial Port
8 Micro SD Card Slot
9 Network Cable (PoE)
10 Power Cable (DC12V±10%)
11 Audio/Alarm Interface
NOTE
l Press RESET about 10s when the camera is powering on or rebooting to restore the default settings,
including the user name, password, IP address, and port No., etc.
l Some of the dome models support audio and alarm functions. The interfaces are shown as follows.
Figure 3-64 Alarm/Audio Cable Interface
3.6.2 Ceiling Mounting
Step 1 Loosen the three screws on the edge of the bubble with the screw driver.
Step 2 Open the bubble and remove the inner black liner.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
3 Camera Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43
To Next Page
Loading...
