Huawei LUNA2000-15-S0 - App-Based Battery Deployment

24
Battery Deployment
6.3
When the app connects to the inverter, a message is displayed, asking you to
upgrade the inverter version. Smart Dongle V100R001C00SPC117 and later
versions support LUNA2000 battery. But the Smart Dongle cannot be upgraded
locally. You need to perform the upgrade through the management system. The
upgrade procedure is updated in the Quick Guide. You can scan the QR code on
the right to obtain the Quick Guide.
FusionSolar
Method 3: Scan the following
QR code and download the
latest installation package.
Creating a Plant
Download and install the FusionSolar app of the latest version by
referring to the quick guide for the corresponding inverter model or
the FusionSolar App Quick Guide. Register as an installer and create a
PV plant or owner (skip this step if an account exists). You can obtain
the FusionSolar App Quick Guide by scanning the QR code.
Log in to the FusionSolar app using the installer's account, choose My > Device Commissioning.
Tap Quick Settings on the home screen to add the battery and set the battery working mode.
Adding Batteries for an Existing Plant
You can tap to obtain the
detailed working mode
information.