Huawei LUNA2000-2.0MWH Series - Page 121

e. Turn o the extinguishant control panel.
f. Take out the key of the extinguishant control panel.
NO TE
Hand over the key to the responsible personnel for safekeeping.
● Model: K11031M2
a. Remove the key from above the extinguishant control panel.
b. Cut
o the cable ties from battery cables on the main board of the
extinguishant control panel.
c. Connect battery cables to the extinguishant control panel.
Figure 4-16 Installing the battery in the extinguishant control panel
d. Turn o the extinguishant control panel.
e. Take out the key of the extinguishant control panel.
NO TE
Hand over the key to the responsible personnel for safekeeping.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 4 Installation
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 111