Figure 7-1 PSU installation position
Procedure
Step 1 Push the locking latch leftward.
Step 2 Pull out the handle.
Step 3 Gently push the PSU into its slot along the guide rails.
Step 4 Push the handle upward.
Step 5 Push the locking latch rightward to lock the handle.
Figure 7-2 Installing the PSU
----End
7.2 Installing the Solenoid Valve
If a solenoid valve is congured with a reset device, ensure that the solenoid valve
is not activated before installing it on the re cylinder. For details, see ''FAQ''.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 7 Powering On the System
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 141
To Next Page
Loading...
