Huawei LUNA2000-200KTL-H0 - Setting System Parameters

8.2.1 Setting Grid Parameters
Procedure
Step 1 Choose Settings > Grid parameters to set grid parameters.
Figure 8-4 Grid parameters (installer)
----End
Parameters
No.
Parameter Description
1 Grid code Set this parameter based on the grid code of the country or
region where the device is used.
2 Output mode Species supported power grid types.
3 Isolation Species the device grounding status at the DC side and the
connection to the power grid.
4 Auto start upon grid
recovery
Species whether to allow the device to automatically start
after the power grid recovers.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 8 Device Commissioning
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 53