C Resetting Password
You are advised to reset the password in the morning or at night when the solar
irradiance is low.
Reset the password only when the AC power is supplied to the Smart PCS from
the power grid, diesel generator, or other voltage-source PCSs.
Step 1 Check that the AC and DC sides of the Smart PCS are both powered on, and
indicators
and are steady green or blinking slowly for more than 3 minutes.
Step 2 Turn o the AC switch between the AC side of the Smart PCS and the power grid
to power o the AC side of the Smart PCS.
Step 3 Turn o the DC switch between the DC side of the Smart PCS and the ESS to
power o the DC side of the Smart PCS.
Step 4 After the Smart PCS is powered o, complete the following operations within 4
minutes:
1. Turn on the AC switch and wait for about 90s or until the Smart PCS indicator
blinks.
2. Turn o the AC switch, and wait for about 30s or until all LED indicators on
the Smart PCS panel turn o.
3. Turn on the AC switch and wait for about 90s or until the Smart PCS indicator
blinks.
Step 5 Log in to the app and reset the password within 10 minutes. Otherwise, all
parameters of the Smart PCS remain unchanged.
----End
LUNA2000-200KTL-H1 Smart Power Control System
User Manual C Resetting Password
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 93
To Next Page
Loading...