4.2.4 Angle Requirements
Figure 4-6 Installation angle
4.3 Preparing Tools
Before installation, the following tools need to be prepared.
Installation Tools
Hammer drill
Drill bit (Ф14 mm
and Ф16 mm)
Insulated torque
socket wrench
(including an
extension bar ≥ 50
mm)
Phillips insulated
torque screwdriver
LUNA2000-200KTL-H1 Smart Power Control System
User Manual 4 Installation
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 32
To Next Page
Loading...