Huawei LUNA2000-200KTL-H1 - Closing the Maintenance Compartment Door; Closing the DC Maintenance Compartment Door

If Smart PCSs are installed on the DCBOX, bind the cables as shown in the
following gure.
Figure 5-23 Binding FE communications cables
----End
5.9 Closing the Maintenance Compartment Door
Precautions
NO TICE
● Before closing a maintenance compartment door, check that the cables are
connected correctly and securely, close the terminal block cover, and remove
any foreign object from the maintenance compartment.
● If a screw on the maintenance compartment door is lost, obtain a spare screw
from the accessory bag in the maintenance compartment.
5.9.1 Closing the DC Maintenance Compartment Door
Step 1 Adjust the support bar, close the maintenance compartment door, and tighten the
two screws on the door.
LUNA2000-200KTL-H1 Smart Power Control System
User Manual 5 Cable Connection
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 59