8.5 Replacing the Smart PCS
Context
The device enclosure is severely damaged or the device hardware is faulty due to
external forces.
Procedure
Step 1 Send a shutdown command on the SUN2000 app, SmartLogger, or management
system.
Step 2 Turn o the external switches on the DC and AC sides.
Step 3 Remove the DC power cables, AC power cables, communications cables, and PE
cable from the Smart PCS in sequence.
Step 4 Remove the Smart PCS based on site requirements.
1. Support-mounted or wall-mounted
Figure 8-18 Removing the Smart PCS
2. Installed on the DCBOX
LUNA2000-200KTL-H1 Smart Power Control System
User Manual 8 Device Maintenance
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 77
To Next Page
Loading...