Huawei LUNA2000-200KWH-2H1 - Page 36

Figure 4-7 Parameter settings after device search
Parameter Description
Scenario under Arrays Operation
Scenario
● In the on-grid scenario, set this
parameter to On-grid.
● In the o-grid scenario, set this
parameter to O-grid.
● In the on/o-grid switchover
scenario, set this parameter to On/
O-grid.
Grid Code Set the grid code of the country or
region where the devices are used.
Working mode under Parameter
Conguration
● In the on-grid scenario, set this
parameter to PQ.
● In the o-grid scenario, set this
parameter to VSG.
Microgrid compatibility under
Parameter Conguration
● In the on-grid scenario, set this
parameter to Disable.
● In the o-grid scenario, set this
parameter to Enable.
Active Power Baseline (kW) under
Parameter Conguration
You are advised to retain the default
value.
Apparent Power Baseline (kVA)
under Parameter Conguration
You are advised to retain the default
value.
Maximum Overload Active Power
(kW) under Parameter Conguration
You are advised to retain the default
value.
Commercial and Industrial Microgrid Energy Storage
Solution
Quick Guide (With Third-Party Microgrid Central
Controller) 4 System Power-On and Commissioning
Issue 04 (2023-12-18) Copyright © Huawei Digital Power Technologies Co., Ltd. 30