Huawei LUNA2000-200KWH-2H1 - Page 37

Parameter Description
Maximum Overload Apparent Power
(kVA) under Parameter
Conguration
You are advised to retain the default
value.
Step 4 (Optional) Connect to power meters.
Set related parameters by referring to "Setting Meter Parameters" in the
SmartLogger3000 User Manual .
Figure 4-8 Connecting to power meters
Step 5 (Optional) Connect to environment monitoring instruments (EMIs).
Figure 4-9 Connecting to EMIs
Step 6 Set battery control parameters.
Commercial and Industrial Microgrid Energy Storage
Solution
Quick Guide (With Third-Party Microgrid Central
Controller) 4 System Power-On and Commissioning
Issue 04 (2023-12-18) Copyright © Huawei Digital Power Technologies Co., Ltd. 31