The power loop of the ESS does not need to be powered o. You are advised to set
the ESS in standby or shutdown mode during replacement.
Procedure
Step 1 Remove the air duct.
Figure 8-10 Removing the air duct
Step 2 Remove cables from the air conditioner.
Figure 8-11 Removing air conditioner cables
Step 3 Remove the front cover of the air conditioner.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 8 Replacing an Air Conditioner
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 98
To Next Page
Loading...
