Huawei LUNA2000-200KWH-2H1 - 9.6 Powering On the ESS

NO TE
● The color of the repainted area must be consistent with that of the surrounding area.
Use a colorimeter to measure the color dierence, which should be less than or equal to
3 (ΔE ≤ 3). If a colorimeter is unavailable, ensure that there is no visible edge between
the repainted area and the surrounding area. The paint should be free of bulges,
scratches,
aking, or cracks.
● If you choose to spray paint, it is recommended that you spray paint three times before
checking the result. If the color does not meet the requirements, paint more times until
the painting meets the requirements.
----End
Paint Supply Information
Table 27-2 Paint requirements
Item Requirement
Primer thickness 60 μm
Intermediate coat thickness 120 μm
Top coat thickness 60 μm
Primer type Epoxy zinc-rich paint
Intermediate coat type Zinc-rich paint
Color number of the top coat Obtain the color number based on the
color palette delivered with the
product.
NO TE
The following is a paint model list provided by Huawei. The list may be updated from time
to time and is for reference only. The cost of paint and technical services is subject to the
local pricing standards.
Supplier
Position Paint Model
Hempel Equipment
surface painting
Zinc-rich primer for pretreatment:
HEMPADUR ZINC (shopprimer) 1536C/
19830
Zinc-rich primer for the entire container:
HEMPADUR ZINC (on line) 1536C/19830
Intermediate coat: HEMPADUR FAST DRY
15560/12170
Top coat: HEMPATHANE 55210/17630
(RAL9003)
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 27 FAQ
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 157