Huawei LUNA2000-200KWH-2H1 - 8.7 Installing a Single-Phase AC Input Power Cable (Without External Grid Power Supply)

Connected
Port
Item SmartLogger
Default Value
Example PC
Setting
WAN port IP address 192.168.0.10 192.168.0.11
Subnet mask 255.255.255.0 255.255.255.0
Default gateway 192.168.0.1 192.168.0.1
NO TE
● When the IP address of the WAN port is in the network segment from 192.168.8.1 to
192.168.8.255, set the default gateway to 192.168.8.1 and the IP address of the LAN
port to 192.168.3.10. If the connected port is a LAN port, you need to adjust the
network
conguration of the PC.
● It is recommended that the PC be connected to the LAN port of the SmartLogger or the
GE port of the SmartModule. When the PC is connected to the GE port of the
SmartModule, adjust the network conguration of the PC to the conguration mode
when the PC is connected to the LAN port of the SmartLogger.
Step 3 Set LAN parameters.
NO TICE
● If the SmartLogger is connected to a local area network (LAN) and a proxy
server has been set, you need to cancel the proxy server settings.
● If the SmartLogger is connected to the Internet and the PC is connected to the
LAN, do not cancel the proxy server settings.
1. Open Internet Explorer.
2. Choose Tools > Internet Options.
3. Click the Connections tab and then click LAN settings.
4. Clear Use a proxy server for your LAN.
Figure 10-1 LAN settings
LUNA2000-200KWH-2H1 Smart String ESS
User Manual 10 SmartLogger Web-based Deployment
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 128