– The color of the repainted area must be consistent with that of the surrounding
area. Use a colorimeter to measure the color dierence (ΔE), which shall be less
than or equal to 3. If a colorimeter is unavailable, ensure that there is no visible
edge between the repainted area and the surrounding area. The paint shall also be
free of bulges, scratches, aking, or cracks.
– If you choose to spray paint, it is recommended that you spray paint three times
before checking the result. If the color does not meet the requirements, paint more
times until the painting meets the requirements.
----End
E.2 Repairing Paint Damage for Mounting Brackets
Prerequisites
● Do not apply paint in bad weather, such as rain, snow, strong wind, and
sandstorm, when there is no shelter outdoors.
● Prepare the following paint:
– Primer: epoxy zinc-rich paint
– Intermediate coat: zinc-rich paint
– Top coat: RAL 9003 (white) and RAL 7035 (gray) polyurethane paint
Paint Repair Description
The equipment appearance shall be intact. If paint has aked o, repair paint
damage immediately.
● Check the paint damage on the equipment and prepare appropriate tools and materials.
The number of materials depends on site requirements.
● The rear mounting bracket color is gray, and the base support color is white.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual E How Do I Repair Paint Damage?
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 108
To Next Page
Loading...