Figure 7-5 Quick settings
----End
Adding a Power Meter Through Smart Dongle
If a third-party inverter is connected to a meter, add the meter through the Smart Dongle
after quick deployment.
Step 1 Log in to the FusionSolar app as installer, choose Me > Device commissioning ,
and connect to the Wi-Fi of the Smart Dongle. (The Smart Dongle Wi-Fi can be
found within three minutes after the Smart Dongle is powered on. If it has been
powered on for more than three minutes, reconnect the Smart Dongle.)
LUNA2000-(5-30)-S0
User Manual 7 System Commissioning
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 102
To Next Page
Loading...
