Figure 7-14 Device monitoring
Scenario 2: Cascaded System Based on SmartLogger Networking
Log in to the FusionSolar app as installer, connect to the SmartLogger. On the
home screen, tap Device monitoring, select the corresponding inverter, and
choose Maintenance > Subdevice management to check the running status,
battery level, power, and charging and discharging status of the ESS. If an alarm is
generated, see 7.3 ''Troubleshooting''.
LUNA2000-(5-30)-S0
User Manual 7 System Commissioning
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 112
To Next Page
Loading...
