Figure 4-11 Basic networking of the parallel o-grid ESS (dashed boxes indicate
optional components)
The primary load power does not exceed the max o-grid output power of the Inverter.
Networking 2: Multiple Inverters Cascaded
You can add inverters and batteries to increase capacity. A maximum of three
inverters can be cascaded. Each battery connects to the inverter through an
independent RS485 port and is managed by the inverter connected to it.
SmartLogger Networking
SmartLogger V300R001C00SPC100 and later versions are supported in this
scenario. For details about commissioning using the SmartLogger, see 6 ''System
Commissioning''.
LUNA2000-(5-30)-S0
User Manual 4 Application Scenarios and Settings
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 50
To Next Page
Loading...
