Huawei LUNA2000-97KWH-1H1 - Page 145

Figure 10-1 LAN settings
5. Click OK.
Step 4 Log in to the SmartLogger WebUI.
1. In the address box of a browser, enter https://XX.XX.XX.XX (
XX.XX.XX.XX is
the IP address of the SmartLogger) and press Enter. The login page is
displayed.
If you log in to the WebUI for the rst time, a security risk warning is
displayed. Click Continue to this website to log in to the WebUI.
NO TE
– It is recommended that users use their own certicates. If the certicate is not
replaced, the security risk warning will be displayed during each login.
– After logging in to the WebUI, you can import a certicate under Maintenance >
Security Settings > Network Security Certicate.
– The imported security certicate needs to be bound to the SmartLogger IP address.
Otherwise, the security risk warning will still be displayed during login.
– If an error message "ERR_INSUFFICIENT_RESOURCES" is displayed for the browser
during login, the browser resources are insucient. Clear the cache and restart the
browser.
– If an error message "ERR_CONNECTION_TIMED_OUT" is displayed for the browser
during login, perform the following troubleshooting operations:
▪
Check whether the browser proxy is abnormal. If yes, set the browser proxy
according to step 3.
▪
Check whether the IP address of another device conicts with that of the
SmartLogger. If yes, assign a new IP address.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 10 Commissioning the ESS (SmartLogger WebUI)
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 135