Huawei LUNA2000-97KWH-1H1 - Installing Components; Installing the Rack Mounted Fire Extinguishing System

7.4 Installing Components
Table 7-2 Component installation list
Component Installation Position Quantity
Rack mounted re
extinguishing
system
Above the power distribution area in the
ESS
1
Battery pack Battery guide rails in the ESS
6/8/10/12
[1]
Rack controller Right side of the ESS 1
Smart PCS Left side of the ESS 1
(Optional)
Maintenance
socket
Power distribution area in the ESS 1
(Optional) Smart
Power Sensor
(DDSU666-H)
Power distribution area in the ESS 1
Note [1]:
● Six dummy battery packs are preinstalled in the LUNA2000-97KWH-1H1 ESS,
in which six battery packs are required.
● Four dummy battery packs are preinstalled in the LUNA2000-129KWH-2H1
ESS, in which eight battery packs are required.
● Two dummy battery packs are preinstalled in the LUNA2000-161KWH-2H1
ESS, in which ten battery packs are required.
● Twelve battery packs are required in the LUNA2000-200KWH-2H1 ESS.
NO TICE
Before installing components, ensure that the ESS is securely installed.
7.4.1 Installing the Rack Mounted Fire Extinguishing System
Prerequisites
● Ensure that the rack mounted re extinguishing system is intact.
● Before installation, read the documents delivered with the rack mounted re
extinguishing system to understand the installation requirements and
precautions.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 7 Installation
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 88